Categories
Quick Navigation

Solution Graphics

Adhesives & Sealants

Showing 1 to 10 of 19 found products
 
  •   Future Glue (Super Glue) 2g
    Add to Cart Our Price: 4.95
    Stronger than Super Glue. Bonds more surfaces than ever before. Now bonds porous or non porous surfaces. For bonding and repairing most meatals, plastics, trim & fabric.
  •   Soudal Roof & Gutter Silicone 300ml Translucent
    Add to Cart Our Price: 8.95

    For all sealing, waterproofing and bonding applications where protection against exterior conditions is required. Offers strong adhesion to aluminium (including powder-coated & anodised), PVC, roof tile, stainless steel, zinc & galvanised coated surfaces, etc.

    Features & Benefits
    • Neutral cure
    • Non corrosive
    • Highly flexible ± 25%
    • Excellent UV Resistance
    • Waterproof
    • Water potable tested
    Application

    A quality, flexible, neutral cure silicone suitable for a wide range of applications including – sealing for roofing, guttering, flashings, cladding, down pipes, ducting, lap joints, sheet metal including Colorbond®, etc.

  •   Soudal 2C Adhesive (50g adhesive/200ml activator)
    Add to Cart Our Price: 11.95

    2C Adhesive is a two pack system consisting of a high viscosity cyanoacrylate adhesive and an aerosol activator. Glues just about anything in seconds.

    APPLICATIONS 

    Bonding of wooden mitre joints

    Fixing and repairing wooden parts

    Suitable for the fast bonding of e.g. MDF, plastics, metal, timber, porcelain, cork, leather, ceramics, cardboard, paper and rubber.


    FEATURES & BENEFITS

    High bond strength

    Very fast bonding 

    Suitable for use on vertical surfaces as it will not drip or slump.

  •   Rapidstick Epoxy Putty - 57g stick
    Add to Cart Our Price: 12.40

    Rapidstick™ 8-145 Epoxy Putty

    Rapidstick™ 8-145 Epoxy Putty is an impact resistant kneadable putty with high bond strength. It consists of two parts in a 1:1 mix ratio and can be easily applied by hand or trowel. Part A (Resin – outer part) and Part B (Hardener – inner part) are separated by a thin film of plastic, and once removed and thoroughly kneaded to combine, the putty sets into an extremely tough, permanent substance, equal to the hardness of metal, in just 15 minutes at room temperature.

    8-145 is used as a moldable space-filler for any shaped space, wet or dry, and can be used as a sealant, gap filler, adhesive, putty, or cement. It can be easily applied by hand or trowel, and bonds to a wide range surfaces, with excellent adhesion to most substrates.

    Upon cure, Epoxy Putty can be sanded, drilled, tapped, machined, filed, and painted. It is ideal for the permanent repair of cracks, holes, dents, and leaks, plus the reshaping of damaged surfaces (chipped railings, dented skirting boards, etc.) and the long-term mounting of signs to walls.

  •   Soudal Multibond SMX35 'Black' (290ml Cartridge)
    Add to Cart Our Price: 14.95
    Multibond SMX35 is a high quality, single component, permanently flexible joint sealant. Perfect for internal & external applications. Based on SMX® Polymer Multibond SMX35 has a “Shore A” hardness of 35 and can accommodate movement of ± 20 %. Multibond SMX35 has excellent UV resistance, elasticity and can be sanded and painted with most types of paint. Once cured forms a strong, flexible, waterproof seal and bonds to the widest range of substrates. Multibond SMX35 can be used for damp and wet surfaces.. Equivalent to Sika Pro & Bostik Seal n Flex.
  •   Soudal Multibond SMX35 'Concrete Grey' (290ml Cartridge)
    Add to Cart Our Price: 14.95
    Multibond SMX35 is a high quality, single component, permanently flexible joint sealant. Perfect for internal & external applications. Based on SMX® Polymer Multibond SMX35 has a “Shore A” hardness of 35 and can accommodate movement of ± 20 %. Multibond SMX35 has excellent UV resistance, elasticity and can be sanded and painted with most types of paint. Once cured forms a strong, flexible, waterproof seal and bonds to the widest range of substrates. Multibond SMX35 can be used for damp and wet surfaces.. Equivalent to Sika Pro & Bostik Seal n Flex.
  •    Soudal Multibond SMX35 'White' (290ml Cartridge)
    Add to Cart Our Price: 14.95
    Multibond SMX35 is a high quality, single component, permanently flexible joint sealant. Perfect for internal & external applications. Based on SMX® Polymer Multibond SMX35 has a “Shore A” hardness of 35 and can accommodate movement of ± 20 %. Multibond SMX35 has excellent UV resistance, elasticity and can be sanded and painted with most types of paint. Once cured forms a strong, flexible, waterproof seal and bonds to the widest range of substrates. Multibond SMX35 can be used for damp and wet surfaces.
  •   90sec Epoxy Glue
    Add to Cart Our Price: 14.95
    • All Purpose
    • Ceramic
    • Glass
    • Wood
    • Leather
    • Fiberglass
    • Metals
    • Most Plastics
  •   Metal Epoxy - Super Glue
    Add to Cart Our Price: 14.95
    Quick Setting Metal Epoxy Adhesive is perfect for repairing appliances, tools, etc. It bonds most metals including copper, steel, stainless steel, aluminum, brass and iron. This product sets in only 5 minutes and the final cure color is light gray. Can be drilled, tapped and filed.
    • Aluminum
    • Brass
    • Copper
    • Iron
    • Stainless Steel
    • Steel
  •   5 Minute Epoxy Adhesive
    Add to Cart Our Price: 14.95

    Rapidstick™ 5 Minute Epoxy is a high strength, versatile, non-shrinking, two-part dual syringe adhesive, which delivers equal parts of both the epoxy resin and the hardener with every use. When mixed in equal volumes, the reaction produces a tough, rigid, high strength bond in 5 minutes for quick project completion.

    5 Minute Epoxy can be used on a wide range of materials as a gap filler, or for surface repairs and laminating. It can also be combined with fibreglass cloth for a durable patch, as well as tinted with earth pigments, cement, or sand for colour matching. Once dry, it can be rubbed back and drilled.

    5 Minute Epoxy is resistant to water and most common solvents, drying clear and making it perfect for transparent repairs, or jobs that require invisible seams.

    Recommended bonding surfaces include, but are not limited to:

    • Metal, Glass, Ceramics, Wood, Rigid Plastics, China, Tile, Fibreglass, Concrete, Stone
Pages: 1 2